Moment Energy unveils Nova storage system built from retired EV batteries
Each Nova unit delivers 500 kWh of energy and 200 kW of power, and the company says its pack replacement service could keep a system in service for more than 20 years.
Machining, additive manufacturing, production and quality.
Each Nova unit delivers 500 kWh of energy and 200 kW of power, and the company says its pack replacement service could keep a system in service for more than 20 years.
The six-wheeled robot is designed to pass 90° elbows in 53 mm pipe and has generated 16.5 N of pull force in straight steel pipe in laboratory tests.
The National PV Industry Measurement and Testing Center certified the steady-state result. The team says cooling the wet precursor film before vacuum treatment reduced fill factor losses.
The HybridTandem module uses Caelux's Energy Producing Glass and is rated at 525 W DC in the same footprint as Sirius PV's existing 450 W residential modules.
A single-material, 3D-printed hexapod reached 4.72 m/s using a pneumatic circuit inspired by the compound steam engine, over 100 times faster than the team's 2022 robot.
Laser powder bed fusion sintered Lunar Highlands Regolith Simulant into centimetre-scale Lego-like blocks with no binding agent, but the compressive strength is 3.4 MPa.
Tesla says it will invest around €3 billion in a new production hall near Berlin rated for up to 1 million Cybercabs a year, a driverless model the EU caps at 1,500 registrations annually.
A mesh of mechanoluminescent silicone fibres lit up green where a pneumatic soft robot deformed, with no battery, wiring or signal-processing circuit for sensing.
The N1 System pairs a steerable catheter with a robotic arm so a surgeon can operate from another room; the company has tested it remotely on a small group of patients.
Zimeng Xiong of Alpaca Engineering built a slicer that overlays non-planar layers on a planar base, tested on a Bambu Labs A1 Mini.
The 70-tonne-payload SKT105ED trucks run at the Zhibula Copper Mine at 17,700 feet, using Eacon Mining Technology's autonomous haulage system.
The PHA-based material is made by microbial fermentation of plant byproducts and is already used in refill bottles and perfume caps, the company says.
Researchers in China report that a 4.7 % emulsion coverage ratio limited minority carrier lifetime degradation to 0.41 % after 10,000 printing cycles.
The Bad Lauchstädt plant uses wind power and a converted 25 km gas pipeline; deliveries to TotalEnergies' Leuna refinery are scheduled for 2027.
A methylammonium-free perovskite module reached 22.70% efficiency, against 15.8% for a reference module without the additive strategy, and kept 97.76% of initial efficiency after 1,300 hours.
The company claims nearly 25% less weight and volume and half the magnet mass than its 18,000 rpm Select unit, with production targeted by 2030.
The Indian manufacturer says it may later expand ingot and wafer capacity to up to 10 GW and cell capacity to up to 5 GW, depending on market conditions.
Requiring EU-made cells could raise cell costs from €50 to €85 per kWh; for a 60 kWh pack that is €2,100, a cost the think tank says buyers may bear.
Researchers report heating blade waste to about 2,000°C in seconds yields materials that stiffen resin, with estimated emissions 83–92 % below conventional recycling.
Why a drink can is shaped the way it is.
NC State engineers use friction stir extrusion to turn powdered eggshell into a strengthening phase inside magnesium.
The laser powder bed fusion machine has a 750 × 750 × 1000 mm build volume and up to 12 lasers.