EPREVAEngineer Paper
MININGAnalysisElectricalManufacturingTransport

SANY deploys 60 driverless electric haul trucks at Tibetan copper mine

The 70-tonne-payload SKT105ED trucks run at the Zhibula Copper Mine at 17,700 feet, using Eacon Mining Technology's autonomous haulage system.

Young female technician repairing electrical control panel in industrial setting.
Photo: mickael ange konan / Pexels

What has been deployed

SANY has deployed 60 of its SKT105ED battery electric haul trucks at the Zhibula Copper Mine in Tibet, according to Electrek. The trucks are rated for a 70-tonne payload. Zijin Mining and Tibet Julong Copper operate the mine, which sits at an elevation of 17,700 feet in a region of the Gangdese Mountains known as the Kailas Range.

The trucks are fully self-driving. SANY developed the autonomous haulage solution with Eacon Mining Technology, a company based in Perth, Australia.

Why the mine is a candidate for automation

The report frames the deployment around the difficulty of staffing equipment operators at high altitude. It cites a published paper by Eacon stating that high-altitude illness becomes increasingly relevant above 2,500 metres. The same paper cites research involving workers in Andes mines operating between 3,800 and 4,500 metres, in which 73 % of workers assessed experienced periods of nocturnal oxygen saturation below 85 % during their high-altitude shifts, indicating moderate-to-severe hypoxemia.

Eacon's paper argues that autonomous haulage offers one way to address this challenge. Rather than requiring a driver for each truck, autonomous systems allow fleets to be managed through centralised supervision, with personnel overseeing operations and intervening when required. The paper states that this reduces the need for people to spend entire shifts operating equipment at elevation and changes how workforce resources are allocated across the mine. Depending on the system configuration, some operations can manage autonomous fleets from remote Integrated Operations Centres located away from the mine site, allowing personnel to supervise haulage activities from lower-altitude locations.

How the autonomous system works

According to the report, the solution uses a full suite of in-vehicle and ground-based sensors, adaptive vehicle controls and machine learning. The partnership combines SANY's battery-powered truck platform with Eacon's technology stack. The report describes the resulting trucks as having logic and behaviours suited to China's open-pit mining environments.

Eacon technology is in operation on more than 3,100 autonomous trucks across more than 40 large-scale mines, according to the report. These include Zijin Mining's Zijinshan Gold-Copper Mine and the Norton Gold Fields project in Australia.

Drivetrain and battery specifications

The report states that specifications for this specific deployment were not disclosed. It gives the specifications of the SANY SKT105E trucks deployed elsewhere, noting that the D in SKT105ED is presumably the wide-body variant. Those trucks use a dual-motor electric drivetrain pairing two permanent-magnet synchronous motors with a dual three-speed automated manual transmission. The system delivers 570 kW of continuous power and up to 820 kW at peak output, with each motor producing about 2,430 Nm of peak torque.

The motors draw from a lithium iron phosphate battery pack with capacities ranging from 423 to 642 kWh depending on configuration. The trucks offer regenerative braking to recover energy on downhill runs. Their fast-charging system can reportedly charge the battery from 20 % to 90 % in under an hour.

Limits of the reported evidence

The truck specifications it gives are for SKT105E trucks deployed elsewhere, not confirmed for this mine. The charging time is attributed to reports rather than to a measured result. The health figures come from research on workers in Andes mines between 3,800 and 4,500 metres, not from measurements at Zhibula.

Technical fact box

  • 60 — number of SANY SKT105ED haul trucks deployed at Zhibula Copper Mine
  • 70 tonnes — payload rating of the SKT105ED trucks
  • 17,700 feet — elevation of the Zhibula Copper Mine in the Kailas Range
  • 570 kW — continuous power of the dual-motor drivetrain on SKT105E trucks deployed elsewhere
  • 820 kW — peak output of that drivetrain
  • 2,430 Nm — peak torque per motor on those trucks
  • 423 to 642 kWh — lithium iron phosphate battery capacity range, depending on configuration
  • 20 % to 90 % — battery charge reportedly achieved in under an hour

Sources

  1. High altitude, bitter cold, zero drivers: autonomous trucks take on Tibetan mine — Electrek

Other news outlets are named as sources but not linked.

Discussion

Technical questions and corrections are welcome. Comments are signed and checked before they appear.

No comments yet.

Sign in to add a typed review comment. Reviews are signed with your name.

More analysis