EPREVAEngineer Paper
ExplainerCivil & infrastructureMaterialsThermal

Why bridges have gaps: thermal expansion in practice

Materials grow when they warm up. Let them, or the stress will find its own way out.

steel bridge expansion joint, visible gap between the two deck sections, interlocking finger plates or sliding steel elements, outdoor bridge deck setting
AI-generated image

Almost every material expands when heated. For a bar of length L₀:

ΔL=αL0ΔT\Delta L = \alpha L_0 \Delta T
(1)
Playground · Linear thermal expansion
solve for
Change in length
4.6 mm
Plot change in length against
6000.1300 µm/(m·K) (log)

Small numbers, big structures

α is tiny — about 12 millionths per kelvin for steel — but structures are long and temperatures swing. A 100 m steel bridge deck between a −20 °C winter night and a +40 °C summer afternoon changes length by 12×10⁻⁶ × 100 × 60 ≈ 72 mm. Hence the expansion joints you drive over.

If it can't move

Restrain the bar completely and the strain it couldn't take appears as stress:

σ=EαΔT\sigma = E \alpha \Delta T

For steel, every 10 K of restrained heating adds about 200e9 × 12e-6 × 10 = 24 MPa — about a tenth of the yield strength of mild steel. Rails buckle in heatwaves ("sun kinks") for exactly this reason.

Mixing materials

Joined materials with different α fight each other: aluminium (23 µm/m·K) bolted to steel (12 µm/m·K), solder joints on circuit boards, glass in window frames. Thermal cycling then becomes a fatigue problem. Compare coefficients in the material comparison and run numbers in the thermal expansion calculator.

Use it

Discussion

Technical questions and corrections are welcome. Comments are signed and checked before they appear.

No comments yet.

Sign in to add a typed review comment. Reviews are signed with your name.

More explained