Linear thermal expansion
Length change from a temperature change.
Bridges have expansion joints, rails have gaps and precision machines are temperature-controlled because of this simple relation. A 1 K change is the same as a 1 °C change.
Variables & units
| Symbol | Quantity | Unit here | SI dimension |
|---|---|---|---|
| Change in length | mm | m [L] | |
| Expansion coefficient | µm/(m·K) | K⁻¹ [Θ^-1] | |
| Original length | m | m [L] | |
| Temperature change | K | K [Θ] |
Rearranged
| Solve for | Formula | Dimensions check |
|---|---|---|
| Change in length | ✓ m | |
| Expansion coefficient | ✓ K⁻¹ | |
| Original length | ✓ m | |
| Temperature change | ✓ K |
The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.
Assumptions
- α constant over the temperature range.
- Free expansion — if the part is restrained, thermal stress σ = E·α·ΔT develops instead.
Example
A 5 m aluminium extrusion (α ≈ 23 µm/m·K) warming by 40 K grows by 23e-6 × 5 × 40 = 4.6 mm.
Connected
How much a part grows or shrinks with temperature — and the stress if it cannot move.
Compare stiffness, strength, density, expansion and conductivity — and specific stiffness and strength.
In the elastic region, stress is proportional to strain.
The engineering behind the fastest air-breathing crewed aircraft.
Materials grow when they warm up. Let them, or the stress will find its own way out.