EPREVAEngineer Paper
Research explainedExplainerMechanicalRobotics & automation

Bouncing robots and springs: an energy-based controller for quadruped hopping

A preprint models a quadruped as a spring-loaded inverted pendulum and uses energy conservation to keep its bouncing gait stable — even with 10 % sensor error, in simulation.

The paper explained here
Stable and Robust SLIP Model Control via Energy Conservation-Based Feedback Cancellation for Quadrupedal Applications (arXiv:2511.05402)
Muhammad Saud Ul Hassan, Derek Vasquez, Hamza Asif, Christian Hubicki · submitted 7 Nov 2025
This is Engineer Paper's own explanation, written from the open paper. The original is the primary source; read it before you rely on anything here.
small quadruped research robot with visible spring-like legs, robot caught mid-bounce, legs in compression and extension, believable university robotics lab setting with test equipment
AI-generated image

Running animals — and many legged robots — behave like a mass bouncing on a spring. The spring-loaded inverted pendulum (SLIP) model captures that: a point mass on a massless, springy leg.

Two phases

In flight, only gravity acts, and the controller sets the leg angle for the next landing. In stance, the leg spring compresses and rebounds, and the controller adjusts leg length. The spring's stored energy is

U(r)=12k(r0−r)2U(r) = \tfrac{1}{2} k (r_0 - r)^2
(1)

where r₀ is the rest length of the leg and r its current length.

Playground · Energy stored in a spring
solve for
Stored energy
1.25 J
Plot stored energy against
12,500011 × 10⁷ N/m (log)

The idea

Hassan, Vasquez, Asif and Hubicki (Department of Mechanical Engineering, Florida State University) design the stance controller to track a stable parabolic spline derived from energy conservation, cancelling the dynamics that would otherwise make the bouncing gait drift. They simulate it with the design parameters of the Ghost Robotics Minitaur quadruped.

Results reported

The controller produces stable bouncing gaits and, according to the authors, stays stable with up to 10 % error in sensor measurements.

Use it

Discussion

Technical questions and corrections are welcome. Comments are signed and checked before they appear.

No comments yet.

Sign in to add a typed review comment. Reviews are signed with your name.

More explained