EPREVAEngineer Paper
ExplainerEnergy

Why wind turbines keep getting bigger: the D² and v³ of wind power

Swept area grows with the square of rotor diameter; the power in the wind grows with the cube of its speed. Betz caps what you can keep.

Aerial view of a wind turbine being installed over the sea, showcasing renewable energy construction.
Photo: Greece-China News / Pexels

The power carried by wind through a rotor's swept area A is ½ρAv³. A turbine captures a fraction C_p of it:

P=12ρAv3Cp,A=πD24P = \tfrac{1}{2} \rho A v^3 C_p, \quad A = \frac{\pi D^2}{4}
(1)
Playground · Power in the wind
solve for
Electrical power
18.46 MW
Plot electrical power against
21.100.91.4 kg/m³

The cube of wind speed

10 % more wind speed means 1.1³ ≈ 1.33 — a third more power. Site selection matters more than almost anything else, which is one reason wind farms move offshore, where winds are stronger and steadier.

The square of the diameter

Double the rotor diameter and the swept area — and the power — quadruples. The 18 MW turbines now running at China's Fanshi offshore project have 292 m rotors: about 67,000 m², more than nine football pitches.

The Betz limit

A turbine can't stop the wind completely — the air has to leave. Albert Betz showed in 1919 that the maximum fraction of the wind's power any rotor can extract is 16/27 ≈ 59.3 %. Modern turbines reach C_p around 0.45–0.5 at their best wind speed, including mechanical and electrical losses.

Why not even bigger?

Blade mass grows roughly with the cube of length while the swept area grows with the square, so self-weight and gravity-driven fatigue loads grow faster than the energy captured. Transport, installation vessels and tower heights set practical limits too.

Use it

Discussion

Technical questions and corrections are welcome. Comments are signed and checked before they appear.

No comments yet.

Sign in to add a typed review comment. Reviews are signed with your name.

More explained