
What the study found
A research team at The Hong Kong Polytechnic University (PolyU) has identified a previously overlooked cause of aging in perovskite solar cells exposed to light. The team has also developed a treatment that it says extends the cells' lifetime. Yang Guang, an assistant professor in the PolyU Department of Electrical and Electronic Engineering, conducted the study with a team from Zhejiang University; it was published in the journal Watt. Professor Nam-Gyu Park of Sungkyunkwan University in Korea commended the work in a Research Highlight in the same journal.
Perovskite solar cells are described in the source as efficient, low-cost, lightweight and versatile, and widely seen as one of the most promising next-generation solar technologies. Their performance gradually declines after long exposure to sunlight, a process known as photodegradation. Solar panels must work reliably outdoors for many years, so photodegradation has long been a major barrier to large-scale commercialisation of perovskite cells.
Grains, facets and grain boundaries
The layer of a perovskite solar cell that generates electricity comprises countless tiny crystals called grains. The surface of each grain has a particular orientation, known as its crystal facet. In mixed-facet perovskite solar cells, grains with different facets sit side by side. Each facet has its own properties, which can affect how charges move, how defects form and how the material ages under light. The places where grains meet are called grain boundaries.
When the cell absorbs sunlight it produces negatively charged electrons and positively charged holes. Ideally the two collect to form an electric current. If they meet defects at grain boundaries, however, they can become trapped and cancel each other out. According to the source, this wastes solar energy and gradually damages the cell.
Uneven losses at (100)/(111) boundaries
The team found that in mixed-facet structures, when grains with two common facets, (100) and (111), sit next to each other, charge losses on the two sides of the boundary between them are uneven. The (111) side of the boundary has more defects. Most of these are vacancies: gaps left where formamidinium (FA) ions should be in the material. As a result, an abnormal buildup of holes develops on that side.
The (111) facet is naturally more resistant to aging under light. The buildup of holes unexpectedly makes the (111) grains degrade faster, however, turning them into a source of aging in the cell. The finding indicates that a cell's lifetime depends not only on how stable each grain is, but also on how neighbouring grains interact.
Yang said that previous research has mostly focused on reducing the number of defects. The team has shown for the first time that uneven charge losses between neighbouring grains are a key cause of aging while the cells are working, he said.
How the boundary treatment works
To address this source of degradation, the team added a compound called 3-fluorophenylethylammonium bromide (m-F-PEABr). Its molecules are too bulky to enter the grains, so they naturally collect at the grain boundaries. The positively charged end of each molecule takes the place of the missing FA ions and fills the vacancies at the (111) boundaries, while the fluorine-containing part holds the molecule firmly in place. Once the boundaries are repaired, charge losses on both sides become balanced, so no single spot becomes a focal point for degradation.
Measured efficiency and lifetime
Cells treated with this targeted strategy reached a power conversion efficiency of 26.55%. They also kept over 90% of their initial efficiency after more than 2,200 hours of continuous operation under light equivalent to one sun. This measure, known as the T90 operational lifetime, is described in the source as a key indicator of long-term durability.
Yang said that perovskite solar cells are already highly efficient but that stability is still the biggest barrier to commercialisation. Balancing charge losses between grains can improve both efficiency and stability, he said. The source presents this as a new way of understanding cell aging and a path toward more durable, commercially viable perovskite solar cells.
Technical fact box
- Power conversion efficiency of treated cells: 26.55%
- Efficiency retained after more than 2,200 hours of continuous one-sun operation: over 90% of initial efficiency (T90 operational lifetime)
- Facets involved at the studied boundaries: (100) and (111)
- Dominant defects on the (111) side: FA (formamidinium) ion vacancies
- Treatment compound: 3-fluorophenylethylammonium bromide (m-F-PEABr)
- Mechanism: m-F-PEABr molecules collect at grain boundaries and fill FA vacancies on the (111) side
Sources
- Stabilizing high-efficiency perovskite solar cells by homogenizing inter-grain recombination — Watt — Hengyu Zhang, Bingcheng Yu, Daoyong Zhang et al.
- Researchers uncover hidden cause of aging in perovskite solar cells — TechXplore (Energy & Green Tech)
Discussion
Technical questions and corrections are welcome. Comments are signed and checked before they appear.
No comments yet.
Sign in to add a typed review comment. Reviews are signed with your name.



