EPREVAEngineer Paper

Electrical power

Power delivered to a load equals voltage times current.

P=V IP = V \, I
Playground · Electrical power
solve for
Power
59.8 W
Plot power against
26000.11,000 V

Electrical power is the rate at which energy is transferred to a load. Combined with Ohm's law it gives the two other familiar forms, P = I²R and P = V²/R.

The I²R form is why transmission lines run at high voltage: for the same power, a higher voltage means a lower current and much lower resistive losses.

Variables & units

SymbolQuantityUnit hereSI dimension
PPPowerWm²·kg·s⁻³ [L^2 M T^-3]
VVVoltageVm²·kg·s⁻³·A⁻¹ [L^2 M T^-3 I^-1]
IICurrentAA [I]

Rearranged

Solve forFormulaDimensions check
PowerP=VIP = V I✓ m²·kg·s⁻³
VoltageV=PIV = \frac{P}{I}✓ m²·kg·s⁻³·A⁻¹
CurrentI=PVI = \frac{P}{V}✓ A

The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.

Assumptions

  • DC, or AC with RMS values and a power factor of 1 (purely resistive load). For other AC loads, real power is P = V·I·cos φ.

Example

A 230 V appliance drawing 0.26 A uses about P = 230 × 0.26 ≈ 60 W.

Connected