EPREVAEngineer Paper

Ohm's law

Voltage across a resistor equals current times resistance.

V=I RV = I \, R
Playground · Ohm's law
solve for
Voltage
12 V
Plot voltage against
1,20000.00150 A (log)

Ohm's law says that for an ohmic conductor the current through it is proportional to the voltage across it. The constant of proportionality is the resistance.

It is the first relation every electrical engineer reaches for: sizing a resistor for an LED, estimating the voltage drop in a cable, or checking whether a measurement makes sense.

Variables & units

SymbolQuantityUnit hereSI dimension
VVVoltageVm²·kg·s⁻³·A⁻¹ [L^2 M T^-3 I^-1]
IICurrentAA [I]
RRResistanceΩm²·kg·s⁻³·A⁻² [L^2 M T^-3 I^-2]

Rearranged

Solve forFormulaDimensions check
VoltageV=IRV = I R✓ m²·kg·s⁻³·A⁻¹
CurrentI=VRI = \frac{V}{R}✓ A
ResistanceR=VIR = \frac{V}{I}✓ m²·kg·s⁻³·A⁻²

The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.

Assumptions

  • The component is ohmic: R does not depend on V or I (not true for diodes, lamps at changing temperature, or semiconductors in general).
  • Temperature is constant; resistance of metals rises with temperature.
  • DC or purely resistive AC (for reactive loads use impedance Z).

Example

A 12 V supply drives 0.5 A through a heater element. R = V / I = 12 / 0.5 = 24 Ω.

Connected