EPREVAEngineer Paper

Power in the wind

A turbine's power grows with the square of rotor diameter and the cube of wind speed.

P=12 ρ A v3 Cp,A=πD24P = \tfrac{1}{2} \, \rho \, A \, v^3 \, C_p, \quad A = \tfrac{\pi D^2}{4}
Playground · Power in the wind
solve for
Electrical power
18.46 MW
Plot electrical power against
21.100.91.4 kg/m³

The kinetic energy flowing through the rotor disc each second is ½ρAv³. No turbine can extract all of it: Betz's limit caps the power coefficient at 16/27 ≈ 0.593, and real turbines reach roughly 0.45–0.5 near their best wind speed.

Because of v³, a site with 10 % more wind gives about 33 % more energy — and because of D², doubling the rotor diameter quadruples the swept area. That is why offshore rotors keep growing.

Variables & units

SymbolQuantityUnit hereSI dimension
PPElectrical powerMWm²·kg·s⁻³ [L^2 M T^-3]
ρ\rhoAir densitykg/m³m⁻³·kg [L^-3 M]
DDRotor diametermm [L]
vvWind speedm/sm·s⁻¹ [L T^-1]
CpC_pPower coefficient—dimensionless [1]

Rearranged

Solve forFormulaDimensions check
Electrical powerP = \text{0.5*rho*(pi*D^2/4)*v^3*Cp}✓ m²·kg·s⁻³
Wind speedv = \text{(8*P/(rho*pi*D^2*Cp))^(1/3)}✓ m·s⁻¹
Rotor diameterD = \text{sqrt(8*P/(rho*pi*v^3*Cp))}✓ m

The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.

Assumptions

  • Below rated wind speed. Above it, the turbine pitches its blades to hold rated power.
  • Uniform wind across the rotor disc; real wind shear and turbulence change the picture.
  • Cp includes aerodynamic, mechanical and electrical losses here.

Example

A 292 m rotor at 10 m/s with Cp = 0.45: A = 66 966 m², P = ½ × 1.225 × 66 966 × 1000 × 0.45 ≈ 18.5 MW.

Connected