Normal stress
Axial force divided by cross-sectional area.
Normal stress is the internal force per unit area acting perpendicular to a cross-section. Comparing it with a material's yield strength tells you whether a member will deform permanently.
1 MPa is exactly 1 N/mm², which is why engineers like to work with forces in N and areas in mm².
Variables & units
| Symbol | Quantity | Unit here | SI dimension |
|---|---|---|---|
| Normal stress | MPa | m⁻¹·kg·s⁻² [L^-1 M T^-2] | |
| Axial force | kN | m·kg·s⁻² [L M T^-2] | |
| Cross-section area | mm² | m² [L^2] |
Rearranged
| Solve for | Formula | Dimensions check |
|---|---|---|
| Normal stress | ✓ m⁻¹·kg·s⁻² | |
| Axial force | ✓ m·kg·s⁻² | |
| Cross-section area | ✓ m² |
The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.
Assumptions
- Load acts along the member's centroidal axis (no bending).
- Stress is uniform over the section — far from holes, notches and load points (stress concentrations).
- Linear-elastic material for comparisons with E.
Example
A 10 mm × 10 mm steel bar (100 mm²) carrying 10 kN sees σ = 10 000 N / 100 mm² = 100 MPa — well below the ~250 MPa yield of S235/A36 steel.
Connected
Axial stress, strain, elongation and factor of safety against yield for a bar under tension or compression.
Compare stiffness, strength, density, expansion and conductivity — and specific stiffness and strength.
In the elastic region, stress is proportional to strain.
Mid-span deflection of a simply supported beam with a point load at the centre.
Why a drink can is shaped the way it is.
Bending and shear stresses in beams, clearly animated.
How hard a material is pushed, how far it gives, and the straight line that connects them — until it doesn't.