Beam deflection (simply supported, centre load)
Mid-span deflection of a simply supported beam with a point load at the centre.
Deflection grows with the cube of the span: double the span and the beam sags eight times as much. Stiffness comes from E (the material) and I (the shape) — which is why I-beams put material far from the neutral axis.
A common serviceability limit for floors is L/360; for a 4 m span that is about 11 mm.
Variables & units
| Symbol | Quantity | Unit here | SI dimension |
|---|---|---|---|
| Max deflection | mm | m [L] | |
| Point load | kN | m·kg·s⁻² [L M T^-2] | |
| Span | m | m [L] | |
| Young's modulus | GPa | m⁻¹·kg·s⁻² [L^-1 M T^-2] | |
| Second moment of area | cm⁴ | m⁴ [L^4] |
Rearranged
| Solve for | Formula | Dimensions check |
|---|---|---|
| Max deflection | ✓ m | |
| Point load | ✓ m·kg·s⁻² | |
| Second moment of area | ✓ m⁴ | |
| Young's modulus | ✓ m⁻¹·kg·s⁻² | |
| Span | ✓ m |
The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.
Assumptions
- Euler–Bernoulli beam theory: small deflections, plane sections remain plane, shear deformation neglected.
- Linear-elastic material, constant E and I along the span.
- Pinned supports; self-weight not included.
Example
A 4 m steel beam (E = 200 GPa, I = 1280 cm⁴) with 10 kN at mid-span: δ = 10 000 × 4³ / (48 × 200e9 × 1.28e-5) ≈ 5.2 mm.
Connected
Simply supported and cantilever beams with point or distributed loads: deflection, moment, shear and bending stress.
Tip deflection of a cantilever with a point load at its free end.
Axial force divided by cross-sectional area.
Bending and shear stresses in beams, clearly animated.
The cube of the span, the material's stiffness and the shape of the section — the three levers of every beam you will ever design.