Cantilever deflection (end load)
Tip deflection of a cantilever with a point load at its free end.
A cantilever with the same load and length deflects 16 times more than a simply supported beam loaded at mid-span — supports matter as much as sections.
Variables & units
| Symbol | Quantity | Unit here | SI dimension |
|---|---|---|---|
| Tip deflection | mm | m [L] | |
| End load | kN | m·kg·s⁻² [L M T^-2] | |
| Length | m | m [L] | |
| Young's modulus | GPa | m⁻¹·kg·s⁻² [L^-1 M T^-2] | |
| Second moment of area | cm⁴ | m⁴ [L^4] |
Rearranged
| Solve for | Formula | Dimensions check |
|---|---|---|
| Tip deflection | \delta_{max} = \text{F*L^3/(3*E*I)} | ✓ m |
| End load | F = \text{3*E*I*d/L^3} | ✓ m·kg·s⁻² |
| Second moment of area | I = \text{F*L^3/(3*E*d)} | ✓ m⁴ |
| Young's modulus | E = \text{F*L^3/(3*I*d)} | ✓ m⁻¹·kg·s⁻² |
| Length | L = \text{(3*E*I*d/F)^(1/3)} | ✓ m |
The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.
Assumptions
- Euler–Bernoulli beam theory, small deflections.
- Perfectly fixed support (real connections rotate a little, increasing deflection).
Example
1 kN on the end of a 1 m steel cantilever with I = 50 cm⁴: δ = 1000 × 1 / (3 × 200e9 × 5e-7) ≈ 3.3 mm.
Connected
Simply supported and cantilever beams with point or distributed loads: deflection, moment, shear and bending stress.
Mid-span deflection of a simply supported beam with a point load at the centre.
The cube of the span, the material's stiffness and the shape of the section — the three levers of every beam you will ever design.