
Longi launched its Hi-MO X10 Full-Screen Triple-Protection PV module on 17 November at an industry event in Qingdao, China. The module has a front-side light-receiving area ratio of 98.58%, which Longi says is the highest it has achieved in a commercial product.
The module keeps the 2,382 mm × 1,134 mm dimensions of Longi's existing Hi-MO X10 lineup for distributed PV applications. It increases the light-receiving area by 759.3 cm² through four structural modifications. First, Longi says it eliminated 20 white gaps between cells using a low-temperature film-welding process that bonds the cells at ambient temperature before a low-heat lamination step; the process reportedly limits the resulting height difference to 130 micrometres and recovers 178 cm² of light-receiving area. Second, the company moved three front-side busbars to the rear of the module, adding another 294 cm². It says thinner busbar profiles and staggered positioning help mitigate the risk of microcracks associated with rear-side busbar stacking. The remaining changes are a reduction in inter-string spacing from 1.48 mm to 1 mm and a cut in the cell-to-frame creepage distance from 12.9 mm to less than 9 mm through upgraded insulation materials.
The module delivers a maximum front-side power output of 680 W and a conversion efficiency of 25.2%. Its standard power rating for volume production is 670 W, which Longi claims is 20 W higher than that of mainstream TOPCon modules of the same size. The relocated busbars add rear-side shading, so Longi replaced flat ribbons with round-wire ribbons, introduced precision-insulated sub-busbar break points and developed an alloy frame profile designed to prevent the frame's C-shaped section from shading the cells. The company says these changes increase the rear-side light-receiving area by 2.5% and enable a maximum bifaciality of 85%.
The triple-protection design targets hotspots, electrical arcing and microcracks, which Longi identifies as particularly significant reliability challenges for commercial and industrial rooftop installations. For hotspot protection, the company integrated structures equivalent to bypass diodes within each hybrid passivated back contact (HPBC) 2.0 cell, which it claims can limit hotspot temperatures to below 100 °C. For electrical arcing, Longi uses laser fusion welding in the junction box to eliminate metal-to-metal interface gaps that can contribute to DC arc formation. Microcrack resistance comes through the same low-temperature welding process used in the full-screen design, combined with thinner busbars to reduce mechanical stress during transportation and installation.
The module has received TÜV SÜD and TÜV Rheinland certifications under IEC 61215 and IEC 61730. Longi also reported double-stress potential-induced degradation (PID), light-induced degradation (LID) and light- and elevated-temperature-induced degradation (LeTID) testing, along with level-six salt-mist, ammonia and dust testing, and hail-impact qualification using 25 mm and 35 mm hailstones. The product comes with a 15-year materials warranty and a 30-year linear power-output warranty, with maximum first-year degradation of 1% and annual linear degradation of no more than 0.35%.
Longi says shipments of its Hi-MO X10 Triple-Protection modules reached 1.5 GW in China's C&I market in August 2026, and that triple-protection variants accounted for more than half of its distributed PV shipments in the first nine months of 2026. At the launch, Longi Chairman Zhong Baoshen cited internal laboratory results showing that the company's hybrid interdigitated back-contact (HIBC) solar cell had achieved a conversion efficiency of 28.29%, approaching the theoretical crystalline silicon efficiency limit of 29.4% cited by the company. He positioned the full-screen module design as a complementary approach to improving power output through structural optimization, alongside further gains in cell conversion efficiency.
Key facts
- 98.58% front-side light-receiving area ratio, the highest Longi reports in a commercial product
- 680 W maximum front-side power output; 25.2% conversion efficiency
- 759.3 cm² increase in light-receiving area through four structural modifications
- Up to 85% maximum bifaciality, with rear-side light-receiving area increased by 2.5%
- 1.5 GW of Hi-MO X10 Triple-Protection modules shipped in China's C&I market in August 2026, according to Longi
Sources
- Longi presents 25.2%-efficient solar module with triple-protection design, larger light-receiving area — pv magazine
Other news outlets are named as sources but not linked.
Discussion
Technical questions and corrections are welcome. Comments are signed and checked before they appear.
No comments yet.
Sign in to add a typed review comment. Reviews are signed with your name.



