
A small gear driving a large one turns the large one more slowly, with more torque. The ratio is set by the teeth:
A 20-tooth pinion driving a 60-tooth gear gives i = 3: one third of the speed, three times the torque (less losses).
Power is conserved — almost
Shaft power is torque times angular speed:
Multiply torque by 3 and divide speed by 3, and the power is unchanged. Real spur-gear meshes lose roughly 1–3 % each, mostly as heat from sliding friction, so a three-stage gearbox might deliver around 92–97 % of its input power.
Stages and direction
Each external mesh reverses the direction of rotation. Two stages turn the output the same way as the input. Multi-stage gearboxes multiply their ratios: (60/20) × (45/15) = 9. Try any train in the gear ratio calculator.
Where ratios come from
Electric motors are most efficient at high speed; wheels, winches and robot joints need low speed and high torque. The gearbox matches them. Robot joints often use very high ratios (50:1 to 160:1) — which also makes them hard to back-drive, a safety consideration for robots working near people.
Use it
Discussion
Technical questions and corrections are welcome. Comments are signed and checked before they appear.
No comments yet.
Sign in to add a typed review comment. Reviews are signed with your name.



