EPREVAEngineer Paper

Reynolds number

Ratio of inertial to viscous forces; predicts laminar or turbulent flow.

Re=ρ v DμRe = \frac{\rho \, v \, D}{\mu}
Playground · Reynolds number
solve for
Reynolds number
49,800 —
Plot reynolds number against
998,00000.120,000 kg/m³ (log)

The Reynolds number compares the momentum of a flow with the viscous forces that damp it. In a round pipe, flow is reliably laminar below Re ≈ 2300 and usually turbulent above about 4000; in between it is transitional.

It matters because friction losses, heat transfer and mixing all change dramatically between the regimes.

Variables & units

SymbolQuantityUnit hereSI dimension
ReReReynolds number—dimensionless [1]
ρ\rhoDensitykg/m³m⁻³·kg [L^-3 M]
vvMean velocitym/sm·s⁻¹ [L T^-1]
DDPipe diametermmm [L]
μ\muDynamic viscositymPa·sm⁻¹·kg·s⁻¹ [L^-1 M T^-1]

Rearranged

Solve forFormulaDimensions check
Reynolds numberRe=ρvDμRe = \frac{\rho v D}{\mu}✓ dimensionless
Mean velocityv=Re μρDv = \frac{Re\,\mu}{\rho D}✓ m·s⁻¹
Pipe diameterD=Re μρvD = \frac{Re\,\mu}{\rho v}✓ m
Dynamic viscosityμ=ρvDRe\mu = \frac{\rho v D}{Re}✓ m⁻¹·kg·s⁻¹
Densityρ=Re μvD\rho = \frac{Re\,\mu}{v D}✓ m⁻³·kg

The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.

Assumptions

  • Fully developed flow in a circular pipe (use the hydraulic diameter for other shapes).
  • Newtonian fluid.
  • The 2300 / 4000 thresholds are typical, not sharp — disturbances can trigger turbulence earlier.

Example

Water at 20 °C (ρ = 998 kg/m³, µ = 1.002 mPa·s) at 1 m/s in a 50 mm pipe: Re = 998 × 1 × 0.05 / 0.001002 ≈ 49 800 — turbulent.

Connected