EPREVAEngineer Paper

Heat conduction (Fourier's law)

Steady heat flow through a flat wall.

Q˙=k A ΔTL\dot{Q} = \frac{k \, A \, \Delta T}{L}
Playground · Heat conduction (Fourier's law)
solve for
Heat flow
384 W
Plot heat flow against
4.8 × 10⁶00.01500 W/(m·K) (log)

Heat flows from hot to cold at a rate proportional to the conductivity, the area and the temperature gradient. Insulation works by having a very low k.

Variables & units

SymbolQuantityUnit hereSI dimension
Q˙\dot{Q}Heat flowWm²·kg·s⁻³ [L^2 M T^-3]
kkThermal conductivityW/(m·K)m·kg·s⁻³·K⁻¹ [L M T^-3 Θ^-1]
AAAream²m² [L^2]
ΔT\Delta TTemperature differenceKK [Θ]
LLThicknessmmm [L]

Rearranged

Solve forFormulaDimensions check
Heat flowQ˙=k*A*dT/L\dot{Q} = \text{k*A*dT/L}✓ m²·kg·s⁻³
Thermal conductivityk=Q*L/(A*dT)k = \text{Q*L/(A*dT)}✓ m·kg·s⁻³·K⁻¹
AreaA=Q*L/(k*dT)A = \text{Q*L/(k*dT)}✓ m²
Temperature differenceΔT=Q*L/(k*A)\Delta T = \text{Q*L/(k*A)}✓ K
ThicknessL=k*A*dT/QL = \text{k*A*dT/Q}✓ m

The dimension of every rearrangement is computed from the dimensions of its variables by our expression engine — so a typo in a formula on this page would show up here in red.

Assumptions

  • Steady state, one-dimensional conduction through a homogeneous slab.
  • Surface (convective) resistances neglected — in real walls they add to the total thermal resistance.

Example

12 m² of 25 mm mineral wool (k ≈ 0.04 W/m·K) with 20 K across it: Q = 0.04 × 12 × 20 / 0.025 = 384 W.

Connected